How to Spot Defects in Roasted Coffee: A Practical Guide

How to Spot Defects in Roasted Coffee: A Practical Guide

5 min read

Not everything that looks different in roasted coffee is a sign of poor quality. In this article, we explain how to identify defects such as quakers, chipped beans, excessive shine, and tipping, as well as which variations are perfectly normal, like finding a few smaller beans or noticing certain characteristics in decaffeinated coffee.

Ever opened a bag of coffee and wondered whether those lighter, smaller, or shiny beans are a sign of poor quality? This article is for you. Spotting defects in green coffee is fairly straightforward. Doing it in roasted coffee is a bit trickier, because roasting transforms the raw material. Here’s what to look for, and what you don’t need to worry about the next time you open a bag. 

First Things First: There Should Never Be Foreign Material 

The first thing to check in any bag of coffee is that nothing in it is foreign: not a pebble, not a screw, nothing at all. It sounds unlikely, but it can happen even with very good coffees. The machines that process green coffee remove about 99.9% of this kind of material, but every once in a while, something tiny slips through. It should always be the exception, never the rule, and any serious roaster should replace a bag right away if it happens. 

The Quaker: The Most Common (and Easiest to Spot) Defect 

The easiest defect to see with the naked eye in roasted coffee is what’s known as a “quaker.” It’s a bean that doesn’t develop the expected color during roasting. In a medium roast, for example, the rest of the beans reach a specific tone, while the quaker stays noticeably paler and underdeveloped. 

These beans usually come from less dense coffee that the sorting machines didn’t manage to separate out during milling. In the cup, they tend to taste different from the rest: a bit more grainy, drier, and not especially pleasant. Any roaster’s goal should be zero quakers. In fact, at Pergamino we’re investing in a color sorter built specifically for roasted coffee, which will get us closer to that goal. In the meantime, finding a few quakers now and then is normal, even in the best specialty coffees on the market. What matters, again, is that there are only a few: the exception, not the rule. 

Bitten and Cut Beans: A Minor Defect 

Another fairly easy defect to find, though a minor one, is bitten or cut beans. These are beans that aren’t perfectly shaped, either because they didn’t fully develop or because the pulping machine damaged them during processing. You can find a few even in specialty coffee, and they’re not a serious problem. In small amounts, they don’t meaningfully affect the flavor of the final cup. 

Small Beans: Not a Sign of Poor Quality 

A common mistake is thinking that small beans in a bag of specialty coffee mean the coffee is low quality, or even pasilla. They don’t. Finding some small beans is completely normal, as long as they don’t have any other defect. Size alone doesn’t determine a bean’s sensory quality. 

What we do want to avoid is a very high percentage of the raw material, say 10, 15, or 20%, being small in an uneven way, since that can affect how evenly the coffee roasts. But some origins are consistently small by nature. Aponte’s honey-processed coffee and coffees from Inzá, for example, tend to have smaller beans because they’re grown at very high altitudes. That doesn’t make them inferior. On the contrary, they’re usually very dense coffees with excellent aromatic quality. 

A Special Case: Decaf 

Decaf has two visual quirks worth knowing about so you don’t mistake them for defects. The first is that it looks darker than you’d expect, even in a medium roast, because of the chemical changes the bean goes through during the caffeine removal process. The second is that it can have a slight oily sheen on the surface. That sheen doesn’t come from the coffee’s natural oils, but from an organic wax applied at the end of the decaffeination process. Neither of these affects the flavor. 

When Coffee “Sweats” Oil: Oxidized Oils and Stale Flavor 

This is where it’s worth paying close attention. When a roasted bean looks visibly greasy, much more than the subtle sheen of decaf we just mentioned, it’s a sign that the coffee’s natural oils have already migrated to the surface and are starting to oxidize on contact with oxygen. That oxidation creates what we know as a stale smell and taste, which gets stronger as time passes after roasting. 

This defect shows up most often in very dark roasts, even in coffees sold as “premium” at steep prices. It’s a good reminder that a high price or a flashy label doesn’t, on its own, guarantee the physical quality of the product. 

Tipping: The Defect of Very Dark or Very Fast Roasts 

There’s a belief that you can’t find quakers in very dark roasts because the overall dark color hides the difference. In reality, they can be there. They’re just harder to see. 

Very dark or very fast roasts can also cause another defect called “tipping”: a kind of burn or cut visible on the surface of the bean, similar to a burn on skin. It happens when coffee is roasted at very high temperatures to speed up the process, without proper control. The result is a coffee with burnt, bitter flavors, where the taste of the roast ends up overpowering the character of the coffee itself. 

The Short Version: What to Expect (and What Not To) in Quality Roasted Coffee 

Spotting defects in roasted coffee is generally harder than in green coffee, but there are a few clear signs you can look for in your own bag: 

  • Foreign material: it should never show up. If you find some, that’s reason enough to contact the roaster. 

  • Quakers: the most common defect, especially in light and medium roasts, where they stand out more. There should be few, not many. 

  • Bitten or cut beans: normal in small amounts, with no real impact on flavor. 

  • Small beans: not a defect on their own, as long as they aren’t too large a share of the bag. 

  • Heavy oily sheen: a sign of oxidized oils and stale flavor, especially common in dark roasts. 

  • Tipping: visible burn marks, linked to very fast or poorly controlled roasts. 

If you ever find several quakers in your coffee, you can simply pick them out by hand before brewing. And if you’re curious, try this experiment: if you can gather enough beans with a minor defect to brew a separate cup, compare it with the rest of your coffee and draw your own conclusions about how much, or how little, the flavor changes.

The Bottom Line 

A high-quality roasted coffee isn’t perfect in an absolute sense. Even the best raw materials in the world can occasionally have a quaker or a bitten bean. What really sets a good coffee apart is that these defects are the exception, not the norm, and that you never find foreign objects or clear signs of oxidized oils. With this guide, you now have the tools to look at your own bag of coffee with fresh eyes and even run your own experiment at home. And that wraps up our series on the physical quality of coffee, from green bean to cup. 

Frequently asked questions

What is a quaker bean?
It’s a bean that doesn’t develop the expected color during roasting, usually because it comes from less dense coffee that wasn’t properly separated out during milling. It’s the easiest defect to spot with the naked eye, especially in light and medium roasts, and it tends to taste grainier and drier.
Do small beans in a bag of coffee mean poor quality?
No. A bean’s size doesn’t determine its quality. Density is what matters. Some high-quality origins, like those grown at high altitudes, naturally produce smaller, denser beans. It’s only a problem if a very high percentage of the bag is small in an uneven way, since that can affect the roast.
Why do some coffee beans look oily or shiny?
There are two very different reasons. In decaf, the sheen comes from an organic wax applied at the end of the process and doesn’t affect flavor. In very dark roasts, the sheen usually means the coffee’s natural oils have migrated to the surface and are oxidizing, which leads to a stale flavor.
Back to blog